Selective Pallet Racks are the most commonly used pallet storage equipment. Selective racking provides 100% selectivity to every load, since you can always access every pallet. For faster moving product, and the best access, selective racks are the system of choice.
Roll formed – Roll formed racks are constructed of a variety of light gauge, high yield, high strength steel that is shaped in a roll forming machine. Before the steel moves through the machine, the column it is punched with the hole for the connection. Roll formed rack is much easier to install and change elevations. Each time the steel is bent, it increases the load bearing properties of the product. This process allows us to build high capacity racking without the weight of structural racks.
Structural – Structural Pallet racks constructed of hot rolled structural channel extraordinarily capable of withstanding the wear and tear of the toughest environments. This makes structural channel type rack popular in harsh duty applications like freezers, coolers, and distribution facilities.
MOBILE AISLE SHELVING
Valuable kitchen and cooler space can be increased without adding on. By using a mobile aisle system with aluminum carriages and NSF wire shelving this Hospital was able to add inventory needed to serve their patients.
Wire mesh is welded to the top of support channels to create a full width deck to support your pallets. The decking is not flammable like wood and not solid like metal deck. These two features allow light, air and sprinkler water to flow through unimpeded. Wire decking is a great addition for a safe and clean warehouse.
Pushback storage increases the pallet count, while offering many more pick faces than traditional high density storage systems. Pallets are placed on carts that ride on inclined rails mounted to standard pallet racking. Each pallet is then pushed back by when the next pallet is loaded. When product is removed, the pallet behind moves forward.
PALLET FLOW RACKS
Pallet flow racking uses flow rails with speed controls mounted in standard pallet racking to allow pallets to move by gravity from the loading end to the unloading end. As a load is removed, the loads behind it move forward to the unloading position.
DRIVE IN RACKS
Drive-In racking is designed for forklifts to drive directly into the rack to for storage of two or more pallets deep. Because forklifts enter Drive-In racks, these racks are subjected to much more abuse and must be designed accordingly.
Carton flow rack uses gravity, inclined shelves and rollers to deliver product from the restocking to the picking side of the system. The fact that just one carton of each line item is located on the pick face means that a large number of SKU’s are presented to the picker over a small area. Walking time is drastically reduced, which increases efficiency in the operation and gives you significant labor savings.
FREE STANDING STRUCTURAL MEZZANINE
Reclaim that existing valuable overhead space by installing a custom designed free standing mezzanine designed and built to meet your specific needs. Mezzanines assemble quickly with the simplicity of “erector set” and are constructed to form rugged, high-load-bearing overhead levels. Heavy-duty columns provide rigid support, eliminating obstructing bracing and providing maximum flexibility of movement and utilization of the lower level. Accessories include railings, stairs, landings, swing gates, sliding gates, types of decking and more. The structure can be expanded to meet future requirements.
Vertical Lifts consist of several trays and an extraction platform. The lift retrieves the tray you require based upon your commands. When you have completed your work, the tray is then replaced in the storage area and the next tray is retrieved.
DRIVE IN RACK TO PUSH BACK RETROFIT
We can design and install new pallet pushback lanes in your existing drive-in rack system. The new push back lanes will give you more flexibility and accessibility of your products.